High pressure micro mist humidification
Use a high-pressure plunger pump to increase the water pressure to 4-7Mpa, and then atomize the pressurized water through the high-pressure transmission pipeline through the nozzle to produce 3-15um micro-mist particles, which can quickly mix with dust in the air Combine and settle to achieve the purpose of dust reduction.
System advantages:
- Low energy consumption: Each unit consumes only 2.2-4KW electricity per hour, which is about 1/50 of the energy consumption of traditional air-conditioning dust reduction.
- Low cost: The purchase cost is low. It is only about 1/25 of the traditional air-run dust reduction.
- Large spray volume: Each device can meet the dust suppression requirements for an area of about 6,000 square meters.
- Excellent quality: The core components of the main machine are all imported from Germany, with a lifespan of more than eight years. PLC intelligent human-machine interface control makes it truly maintenance-free.
Product Features:
Light mist to reduce dust
Water from tap water, wells or fire pools is used to form flying water mist through the dust reduction system, which absorbs dust particles and impurities in the air. When the wind speed on site is lower than Level 2, the concentration of particulate matter in the air at the construction site can be reduced. 85%. At the same time, after spraying at high altitude for a period of time, the ground will be in a moist state, effectively inhibiting dust from rising again.
Micro mist maintenance
During the entire construction period of the main body, the water volume of the nozzle can be adjusted according to the actual conditions on site to maintain the main body.
Micro mist cooling
The surface temperature at the construction site in summer is close to 50 degrees Celsius, making it very difficult for workers to work. However, if we can use our spray dust reduction system to spray regularly, we can effectively achieve "artificial rainfall" on the construction site and reduce the temperature on site by 2-4 degrees Celsius, thereby improving construction. environment and reduce the probability of heat stroke among workers.
Small mist host model parameters:
